Why buy from a jib crane manufacturer in Sydney, not a reseller
A jib crane is only as sound as the engineering behind it. Because Sorian is the manufacturer — not a reseller forwarding your enquiry to a factory — a qualified mechanical engineer owns the design from first sketch to finished steel, sizing the structure to AS 1418 for the duty you specify. Freestanding, wall-mounted, pillar-mounted and articulated jibs from 125 kg to 5 t MRC are designed and built in-house, with the supplied hoist and controls selected to suit the crane rather than dictating it.
For a New South Wales buyer, that in-house control is the difference between a unit assembled to an average spec and one matched to your work. You deal directly with the people who engineered the crane, so calculations, design changes and documentation come straight from the source — and stay traceable through its service life. Talk to the engineer who will specify your crane.
Why local matters for a jib crane install
Sydney's industrial mix — manufacturing and logistics across Wetherill Park and Smithfield, defence and aerospace at Bankstown, food processing through Eastern Creek, and infrastructure construction services in the Western Sydney aerotropolis — drives a wide range of jib crane requirements. A jib crane sized correctly for a precision assembly cell looks nothing like one specified for heavy fabrication or mining maintenance. Getting the engineering review done by someone who's actually walked the site, measured the structure, and understood the duty cycle is the difference between a crane that serves your operation for decades and one that fails its first major inspection.
We work directly with Sydney businesses across the metro area and into Newcastle and Wollongong. Site visits are free, and the engineering review starts before the quote — not after the order is placed.
Compliance — New South Wales. NSW requires plant design registration for higher-risk overhead lifting under the Work Health and Safety Regulation 2017. We complete the SafeWork NSW design registration where the crane meets the trigger criteria and include the registration number in handover documentation.
Sydney's industrial vacancy is among the tightest in the country, which means most installs we do here are either in existing brownfield sheds — where headroom and column position dictate the design — or in the new Western Sydney aerotropolis precinct around Bradfield. We design to suit either constraint, and provide measure-up reports that show exactly where the crane will sit relative to existing services and roof structure.
Your Sydney jib crane manufacturer — engineered and built, not just shipped
A jib crane bought sight-unseen from a catalogue is a gamble on your structure. As the manufacturer, we engineer and build every Sydney jib crane — column, base plate, foundation and bracing — to AS 1418 and AS 2550 for the duty cycle and slab on your site, from the manufacturing estates at Wetherill Park and Smithfield to harbour-side fabrication at Botany. You get the calculation summary with the quote, not after the order is placed.
Jib Crane variants we supply in Sydney
The standard range covers freestanding (column-mounted), wall-mounted, pillar-mounted, track-mounted, and articulated folding-arm configurations, all available with 125 kg to 5 t capacity and reach to 6 m. Each variant suits different applications:
- Standard configurations — most Sydney installations
- Heavy-duty configurations — for high-cycle production lines and mining maintenance
- Custom-engineered configurations — when your application doesn't fit a standard product
For a full description of variants and technical specifications, see our national jib crane page.
Industries we serve in Sydney
Common jib crane applications across Sydney and New South Wales:
- Defence & aerospace (Bankstown) — jib crane for AGSE handling, ADF supply-chain assembly, precision component work
- Advanced manufacturing (Wetherill Park, Smithfield, Silverwater) — jib crane for press tending, automated cell support, jig assembly
- Food & beverage processing (Eastern Creek, Auburn) — jib crane for stainless installs, equipment maintenance, washdown
- Infrastructure construction (Western Sydney aerotropolis (Badgerys Creek), St Marys) — jib crane for precast handling, plant maintenance, modular yard work
- Logistics & warehousing (Botany, Ingleburn, Penrith) — jib crane for container work, heavy-item handling, equipment fit-out
Wind, terrain & foundations. Sydney sits in AS 1170.2 Region A2 (non-cyclonic). Standard ULS design wind speeds apply, with directional adjustments for prevailing southerly weather fronts. Foundation design accounts for the variable Sydney geology — Hawkesbury sandstone through the inner ring, alluvial Cumberland clays across the western suburbs, and coastal exposure for sites near Botany and the eastern beaches.
Suburbs we install in
We install across all Sydney metro suburbs, including Wetherill Park, Smithfield, Eastern Creek, Bankstown, Silverwater, Auburn, Penrith, Ingleburn, Botany, St Marys, plus regional New South Wales. Travel doesn't add to your quote — we cost on a per-job basis, not per-kilometre.
Comparing jib crane manufacturers in Sydney?
Sydney has no shortage of jib crane manufacturers on paper — the question is which of them actually build what they sell. Four checks sort it out. First, ask who owns the engineering: Sorian's designs are specified in-house by a qualified mechanical engineer, not forwarded on to a distant factory. Second, confirm the design basis — every Sorian jib is designed to AS 1418 with a stated MRC rating, from 125 kg to 5 t. Third, confirm the steel: where we build locally, the structural plate is Australian, certified to AS/NZS 3678. Finally, check who installs and services the crane afterwards; we do both across Sydney, from Wetherill Park to Botany, so the people who built your crane are the ones who stand behind it.
The Sorian process — site visit to commissioning
- Free site visit — we measure the structure, capacity needs, span/reach, headroom, power supply, access for install
- Engineering review — capacity, duty class per AS 1418, runway loads (if applicable), column and base plate sizing
- Fixed-price quote — usually within one business day of site visit, with calculation summary attached
- Manufacturing and supply — typically 4-8 weeks lead time from order
- Installation — typically 1-2 days on site, including commissioning and load test
- Handover documentation — engineering calcs, certificates, O&M manuals, WorkSafe design registration where required
Frequently asked questions
Do you supply jib cranes across Sydney?
Yes — we design, supply and install jib cranes across the entire Sydney metropolitan area including Wetherill Park, Smithfield, Eastern Creek, Bankstown, Silverwater, Auburn, Penrith, Ingleburn, Botany, St Marys, plus regional New South Wales. Site visits are free and typically scheduled within a week of enquiry.
How long does a jib crane install take in Sydney?
Typical jib crane installations take 1-2 days on site once the supplied components arrive. Lead time from order to install is usually 4-8 weeks depending on capacity, structural design complexity and whether WorkSafe design registration is required for your jurisdiction.
Are your jib cranes compliant with NSW WorkSafe requirements?
Every jib crane we supply is designed to AS 1418 and AS 2550 and includes the engineering documentation needed for NSW WorkSafe registration where applicable. We manage the design registration process where the crane requires it.
What's a typical jib crane cost in Sydney?
Pricing depends on capacity, configuration and structural requirements. We provide fixed-price quotes after a site visit — typically within one business day of inspection. A brief phone call gives you an indicative number.
Talk to an engineer
Get a free site visit in Sydney. Every enquiry is reviewed by a qualified mechanical engineer before we respond — usually within one business day.
Request a quote → Try the crane selector →